Product

The sensor is used in the measurement and control system for direct and absolute measurement of displacement and length. The maximum working range of 2500mm, high resolution (0.01mm) can provide accurate linear displacement measurement. The structure design of the sensor is easy to install and disassemble.

Milang KTC1 rod type displacement sensor with high precision, long service life, is used to adjust the system and measurement system, direct measurement of displacement, the length of the output DC voltage signal can transmit output 0-5V/10V voltage signal, 4-20mA standard current signal, RS485 digital signal, digital signal, digital signal Mudbus Start-Stop, used to to meet the requirements of long distance transmission control. The position detection of KTC1 rod type displacement sensor is suitable for various types of equipment, widely used in injection molding machine, die casting machine, rubber machine, shoe machine, EVA injection molding machine, blow molding machine, woodworking machinery, hydraulic and other mechanical equipment for measurement and control system.

Characteristic：

The series sensors are used to measure and control the system, direct and absolute measurement of displacement and length，woke stroke can be most1250mm and high resolution 0.01mm, which can provide accurate linear displacement measurement. The sensor structure design considers convenient installation and disassembly.

Sensor inside and outside the surface of the structure through special treatment, can work under high speed and low wear state. The flexible buffer bearing at the front of the sensor can overcome some minor side stress of the transmission rod and ensure the sensor working normally. Sensor conductive material fixation and structural design ensure that the sensor can work reliably even under the worst conditions.