Product Summary:
WY-01 Resistance displacement sensor (alias: crack meter, crack displacement sensor, electronic ruler, resistance ruler, potentiometer, displacement sensor) Principle: Potentiometer principle, all sensors are position measurement type, used in the adjustment system (control system) and measurement system, to directly measure the displacement and length, output DC voltage signal, can also be converted into the standard 0-5V, 0-10V or 4-20mA DC signal through the built-in or external V/A converter module. Can also be remote transmission control requirements. WY-01 Resistive displacement sensor (alias: crack meter, crack displacement sensor, electronic ruler, resistance ruler, potentiometer, displacement sensor) Output displacement variation: 0-100% given input operating voltage (varies with displacement).
- Product Overview
- Technical Parameters
- Size selection
Attention:The stroke is from 15mm-300mm. If you need different lengths of travel, please contact with the supplier. The default output: 0-100% of the power supply voltage value, which is resistance out put, if you need other signal output, such as 4-20mA, 0-5V, 0-10V,and RS485 signal output please purchase the transmission module in the shop or contact with the supplier...
Technical Parameter
WY Rod Type |
| 15mm | 25mm | 50~75mm | 100~300mm |
Linear Precision (±%FS) | ±0.1% | ±0.05% | |||
Resistance (±10%) | 2ΚΩ | 5ΚΩ | |||
Effective Stroke | range+3mm | ||||
Resolution | Infinite | ||||
Repeatability Precision | 0.01mm | ||||
Max Speed | 5m/S | ||||
Recommended Current | ≤1mA | ||||
Temperature Range | -60℃~+150℃ | ||||
Output | 0~100% × input voltage (change with the movement of therod) | ||||
Sensitivity | 1 | ||||
Temperature Drift | infinitesimal | ||||
Very long life | >100*1000000 cycles,>25*1000000 m | ||||
Installation Dimension
Output type of WY-01 resistive displacement sensor: (same output type as WY-01 and WY-02)
Resistance output type (potentiometer) : 5kΩ, 10KΩ,
Voltage output type (external/built-in module) : 0-5V, 0-10V,
Current output type (external/built-in module) : 4-20MA (two-wire system, three-wire system),
Digital signal (external/built-in module) : RS485,
WY-01 resistance displacement sensor application range:
Features: The whole body stainless steel material, this product is specially designed for cement equipment, cement roller, road and bridge, crack measurement monitoring, bridge measurement monitoring, and other equipment development, dust resistance ability, high sealing grade, resolution is better than 0.01mm, stable performance, strong anti-interference ability, high life, continuous measurement.